Keep your device in pairing mode and hold your phone closer.
IP Camera
Wi-Fi and Wired
Wi-Fi connection by QR code
Scan the QR code on your phone with the camera
Wi-Fi connection by Soft-AP
You connect your phone to the camera and then help it complete the wireless connection
Connection by Ethernet cable
The network connection will be more stable if you hook it up with the Ethernet cable
Wi-Fi connection by Bluetooth
You connect your phone to the camera by Bluetooth and then help it complete the Wi-Fi connection
Power on and check the LEDs/tone
After resetting the device, make sure the indicator is flashing or a prompt tone is heard.
Make sure the indicator is flashing or if you hear a tone
1. Please try resetting the camera (Process: Keep the camera powered on for more than 1 minute, then press and hold the “Reset” button until the LED starts flashing or you hear a tone.)
4G camera
4G only
Quick Pairing
Scan the QR code on the device label for quick pairing
Pairing by QR code on the phone
Scan the QR code generated on your phone with the camera
Power on and check the LEDs/tone
After resetting the device, check if the lights are flashing or if you hear a tone.
Make sure the indicator is flashing or if you hear a tone
Scan the QR code on the Camera
When the QR code is successfully scanned, the device will automatically start pairing.
If the scan fails, you can try to pair the device by clicking the button below to use the QR code on your phone.
Use the Camera to scan the QR Code on the iPhone
Place the QR code on your phone 4~12 inches in front of the camera lens. Pay attention to keep the screen brightness moderate to avoid reflections.
When you hear a tone or see the light blinking quickly, press Next.
- Make sure the device has a working built-in SIM card or a compatible SIM card has been inserted. It is highly recommended to use an official SIM card.
- Please try resetting the camera (Process: Keep the camera powered on for more than 1 minute, then press and hold the “Reset” button until the LED starts flashing or you hear a tone.)
Battery camera
Wi-Fi only
Wi-Fi connection by QR code
Scan the QR code on your phone with the camera
Wi-Fi connection by Soft-AP
You connect your phone to the camera and then help it complete the wireless connection
Confirm the Battery camera is powered on
Make sure that the batteries are installed or the built-in battery is charged. If the camera has a power button, please press and hold for 5 seconds to turn it on.
Enter Pairing-Mode
Press and hold the button until the two colors of the LED flash alternately.
Make sure the indicator is flashing or if you hear a tone
Connect to the device hotspot
Please connect your phone to “AJCxxxxx”Wi-Fi
After the connection is successful, return to the AJCloud app.
Scan the QR code on the Camera
When the hotspot is connected, it will jump automatically.
If the QR code scan fails, you can manually connect to the hotspot.
- Make sure the Battery camera battery has enough power.
- After 60 seconds, you can try to press and hold the pairing button to enter pairing mode again. Or you can go back to the first step.
Light bulb camera
Wi-Fi only
Wi-Fi connection by QR code
Scan the QR code on your phone with the camera
You connect your phone to the camera and then help it complete the wireless connection
Power on and check the LEDs/tone
After resetting the device, make sure the indicator is flashing or a prompt tone is heard.
Make sure the indicator is flashing or if you hear a tone
Connect to the device hotspot
Please connect your phone to “AJCxxxxx”Wi-Fi
After the connection is successful, return to the AJCloud app.
Scan the QR code on the Camera
When the hotspot is connected, it will jump automatically.
If the QR code scan fails, you can manually connect to the hotspot.
1. Please try resetting the camera (Process: Keep the camera powered on for more than 1 minute, then press and hold the “Reset” button until the LED starts flashing or you hear a tone.)
Video Doorbell
Wi-Fi only
Confirm the Video doorbell is powered on
Make sure that the batteries are installed or the built-in battery is charged. If the camera has a power button, please press and hold for 5 seconds to turn it on.
Enter Pairing-Mode
Press and hold the button until the two colors of the LED flash alternately.
Make sure the indicator is flashing or if you hear a tone
- Make sure the Video doorbell battery has enough power.
- After 60 seconds, you can try to press and hold the pairing button to enter pairing mode again.Or you can go back to the first step.
Automatic feeder
Wi-Fi only
Wi-Fi connection by QR code
Scan the QR code on your phone with the camera
Wi-Fi connection by Soft-AP
You connect your phone to the camera and then help it complete the wireless connection
Confirm the Automatic feeder is powered on
Power on and check the LEDs/tone
After resetting the device, check if the lights are flashing or you hear a tone.
Make sure the indicator is flashing or if you hear a tone
Connect to the device hotspot
Please connect your phone to “AJCxxxxx”Wi-Fi
After the connection is successful, return to the AJCloud app.
Scan the QR code on the Camera
When the hotspot is connected, it will jump automatically.
If the QR code scan fails, you can manually connect to the hotspot.
- Please try resetting the camera (Process: Keep the camera powered on for more than 1 minute, then press and hold the “Reset” button until the LED starts flashing or you hear a tone.)